TEL：+886 – 37 – 791 – 993（Rep.）
FAX：+886 – 37 – 793 – 877
© 2025 Copyright – 國勝豐工具機股份有限公司
GLASS LIFTER – GL550 GL700 GL850
The KSF GL Lifter is a compact and versatile material lifter for construction sites and workshops-also ideal for vertical and overhead glazing with optional accessories.
Each KSF GL Lifter in the series comes in two models-an AC version run from mains power, or a AD(AC+AD) version with battery for sites where mains power is not available.
- Quick Folding Base: Easy and convenient setup. Can be setup in 10 seconds by a single operator.
- Adjustable Legs with level: Ensures the unit can be safely setup on uneven surfaces.
Up on a slope to accomplish the level set up.
- Available with AC or AD(AC+AD) motors:
AD Motor (AC+DC series): Operates without mains power via battery, it comes with charger and radio remote control.
AC Motor (AC series): Operates from mains power. Radio remote control is optional.
- Radio remote control: Comes standard with DC units, optional extra with AC units.
- Safety Limiter: If the operator attempts to continue to raise the unit above its maximum operating height, a kill switch will engage. The operator is then required to reset the kill switch with the controller.
- Safety Anti-Fall system on mast.
- 10” Heavy duty castors- make it easy to maneuver the GL lifter on-site.
Specification
| KSF Model | GL-850 (Metric Units) | GL-850 (Imperial Units) |
| Lifting Height | 8.7 m | 28.5 ft |
| Basic Height | 2.15 m | 7 ft |
| Max. Load Capacity | 300 kg | 660 lbs |
| Weight | AC 268 kg AD 350 kg | AC 590 lbs AD 771 lbs |
Features
GL-850AD with standard forks supplied with each model.
GL-850AD with front legs retracted.
GL-850AD with front legs extended.
The cable is protected near the motor-housing for transportation.
safe crane lifting point indicated.
The GL series can be operated on uneven or sloping surfaces.
spirit levels, a variable wheel-base and jacks level and correct setup.
The battery on AD units is protected by a steel housing and is easily connected with a plug.
The GL series can be transported vertical or horizontal.
Easy access to counter weight bay.
Steel pulleys are used for durabillity.
Pulleys are ringed to ensure operator safety.
Steel cable is fed through rollers.
Optional radio remote control with emergency stop.
Each unit comes standard with a 5 meter cable remote control.
Optional
The steel cable runs through rollers
Universal Crane Arm – Standard with each unit
(Part #3017013)
- Universal Crane Arm
- Patented design: universal swivel action for high maneuverability.
- Retracts and folds
- Operating range: 30 – 60 cm (12- 24 in)
- Weight 18 kg (40 lbs)
The steel cable runs through rollers
Optional Accessories – Glass Holders
(Part # 3017015)
- Hanging cradle (optional) – Vertical Glazing
- Loading capacity: 240 kg (529.11 lbs)
- 4 Vacuum cups with flexible angle control.
- Easily lift glass vertically from the ground or from walls.
- Weight: 20 kg (44 lbs)
- Dimensions: 145 x 53 cm (57 x 21 in)
The steel cable runs through rollers
Universal cradle (optional) – Horizontal or Vertical Glazing
(Part # 3017011)
- Load capacity: 210kg. (462.97 lbs)
- Multiple degrees of freedom – angle the cradle in any position.
- 4 Vacuum cups.
- Weight: 27 kg. (60 lbs)
RELATED PRODUCTS
RELATED PRODUCTS
